Iron Powder Material

PLAIN TYPE IRON POWDER CORES

(1)ORDING CODE

PLAIN TYPE IRON POWDER CORES

Shape Dimension Material     Height difference

(2)SHAPE

plain core,amorphous alloy core,iron dust cores,shield core,metal cores,soft ferrite materials,round toroidal core,FeNi core,magnetic ferrite core,soft magnet
plain core,amorphous alloy core,iron dust cores,shield core,metal cores,soft ferrite materials,round toroidal core,FeNi core,magnetic ferrite core,soft magnet

Introduce of plain core

Plain core is low profile and amorphous alloy core. The iron dust cores material is almost exclusively ferrite material and the design of plain core is intended for use with windings etched on a printed circuit board, thereby eliminating the winding of a separate coil. Etching of the windings puts a limit on the number of available turns hence the operating frequency must be high to avoid core saturation. If the turns requirement is sufficiently high, a thin coil cemented to the board under the plain core. Since the typical plain core user does not need a coil, Yuxiang has little experience with plain core.

Application of plain core

Plain core as a core material has been widely used in RF applications, and the distributed air gap properties inherent in iron powder cores also make them extremely well-suited for a variety of energy storage inductor applications, electronic computer, modern communication equipment, instrument and meter, industrial automation, and household electrical apparatus.

TYPE AL OD L
YP3.45-40 core 7.6 .136/3.45 .775/19.7
YP4.83-40 core 12.5 .190/4.83 .750/19.1
YP6.35-40 core 16.0 .250/6.35 .750/19.1
YP6.35-40A core 16.0 .250/6.35 1.000/25.4
YP6.48-40 core 15.0 .255/6.48 1.250/31.8
YP7.95-40 core 20.0 .313/7.95 1.000/25.4
YP7.95-40A core 20.0 .313/7.95 1.250/31.8
YP9.53-40 core 25.5 .375/9.53 1.000/25.4
YP9.53-40A core 26.5 .375/9.53 1.250/31.8
YP9.53-40B core 25.0 .375/9.53 1.500/38.1
YP9.53-40C core 22.5 .375/9.53 1.750/44.5
YP12.7-40 core 34.5 .500/12.7 1.250/31.8
YP12.7-40A core 33.0 .500/12.7 1.500/38.1
YP12.7-40B core 32.0 .500/12.7 1.750/44.5
YP12.7-40C core 31.0 .500812.7 2.000/50.8
YP15.9-40 core 37.5 .625/15.9 1.250/31.8
YP15.9-40A core 41.5 .625/15.9 1.500/38.1
YP19.1-40 core 49.5 .750/19.1 2.375/60.3
YP25.4-40 core 80.0 1.000/25.4 2.000/50.8