(1)ORDERING CODE
Material Type Outside Diameter(AΦ) Length(D) Shape
Materials can be Changed according to your request
P TYPE
Features of P-core:
P-core shape like tube can be used in solenoid coils with almost the same effect as Rods. The inner hole is often used to insert wires to make a ferrite coil former. In EMI suppression applications tube core can also be shifted over wires. Because the magnetic flux path is then closed, a steep increase in impedance results. In such cases however the sensitivity for DC is rather high. Curvature and mechanical tolerances of P-core is during in standard range. Material of P-core head and thread are polypropylene(pp), glass fibre reinforced, and materials can be changed according to your request.
Applications of p-core:
P-core sets are widely used in EMI suppression, Filter application and general purpose transformers and power.
(2)SHAPE
(3)DIMENSIONS
| NO. | TYPE | Fig | Dimensions(mm) | |||||
|---|---|---|---|---|---|---|---|---|
| AΦ | BΦ | CΦ | D | E | F | |||
| 1 | P5.2×3P2 core | 2 | 5.20 ±0.30 | 4.35 ±0.20 | 3.00 ±0.20 | 3.00 ±0.20 | 0.50 ±0.10 | |
| 2 | P5.26×3P2 core | 2 | 5.26 ±0.30 | 4.15 ±0.20 | 3.20 ±0.20 | 3.00 ±0.20 | 0.70 ±0.10 | |
| 3 | P5.5×4.8P2 core | 2 | 5.50 ±0.20 | 3.40 ±0.20 | 4.40 ±0.20 | 4.80 ±0.20 | 0.70 ±0.10 | |
| 4 | P5.5×4.8P2 core | 2 | 5.50 ±0.20 | 3.70 ±0.20 | 4.40 ±0.20 | 4.80 ±0.20 | 0.70 ±0.10 | |
| 5 | P5.9×2.7P2 core | 2 | 5.90 ±0.30 | 4.60 ±0.20 | 5.00 ±0.20 | 2.70 ±0.20 | 1.10 ±0.10 | |
| 6 | P6.9×3.7P2 core | 2 | 6.90 ±0.30 | 4.10 ±0.20 | 5.60 ±0.20 | 3.70 ±0.20 | 0.50 ±0.10 | |
| 7 | P6.9×6P2 core | 2 | 6.90 ±0.30 | 4.10 ±0.20 | 5.60 ±0.20 | 6.00 ±0.20 | 1.30 ±0.10 | |
| 8 | P6.95×4.5P2 core | 2 | 6.95 ±0.30 | 4.10 ±0.20 | 5.37 ±0.20 | 4.50 ±0.20 | 1.10 ±0.10 | |
| 9 | P6×4 core | 1 | 6.00 ±0.20 | 4.80 ±0.20 | 4.00 ±0.20 | 0.50 ±0.10 | ||
| 10 | P6×6.7 core | 1 | 6.00 ±0.20 | 5.50 ±0.20 | 6.70 ±0.20 | 0.80 ±0.10 | ||
| 11 | P7×8.3 core | 1 | 7.00 ±0.20 | 5.80 ±0.20 | 8.30 ±0.20 | 1.10 ±0.10 | ||
| 12 | P7×7.7 core | 1 | 7.00 ±0.20 | 6.60 ±0.20 | 7.70 ±0.20 | 1.10 ±0.10 | ||
| 13 | P8.3×9.9P16 core | 3 | 8.30 ±0.20 | 2.60 ±0.10 | 7.00 ±0.20 | 9.90 ±0.20 | 1.30 ±0.10 | 8.40 ±0.20 |
| 14 | P9.1×9.4P16 core | 3 | 9.10 ±0.20 | 3.00 ±0.10 | 7.00 ±0.20 | 9.40 ±0.20 | 1.40 ±0.10 | |
| 15 | P9.5×8.5P16 core | 3 | 9.50 ±0.20 | 3.00 ±0.10 | 7.00 ±0.20 | 8.50 ±0.20 | 1.30 ±0.10 | |
| 16 | P9.85×6.6P2 core | 2 | 9.85 ±0.30 | 4.50 ±0.20 | 8.20 ±0.20 | 6.60 ±0.20 | 1.40 ±0.10 | |
| 17 | P9.8×11.2 core | 1 | 9.80 ±0.20 | 7.80 ±0.20 | 11.2 ±0.30 | 1.30 ±0.10 | ||
| 18 | P10.2×12 core | 1 | 10.2 ±0.20 | 8.20 ±0.20 | 12.0 ±0.30 | 1.30 ±0.10 | ||
| 19 | P10.5×11.5 core | 1 | 10.5 ±0.20 | 8.40 ±0.20 | 11.5 ±0.30 | 1.50 ±0.10 | ||
| 20 | P12.4×14 core | 1 | 12.4 ±0.20 | 10.5 ±0.20 | 14.0 ±0.30 | 1.60 ±0.10 | ||
| 21 | P12.4×9.8 core | 1 | 12.4 ±0.20 | 10.0 ±0.20 | 9.80 ±0.20 | 1.60 ±0.10 | ||
