(1)ORDERING CODE

Material Type Outside Diameter(AΦ) Inside Diameter(AΦ) Lenth(D)

Material Type Outside Diameter(AΦ) Inside Diameter(AΦ) Lenth(D) Taping&Reel
Materials can be Changed according to your request
Material Type Outside Diameter(AΦ) Inside Diameter(AΦ) Lenth(D)
Material Type Outside Diameter(AΦ) Inside Diameter(AΦ) Lenth(D) Taping&Reel
Materials can be Changed according to your request
RH type, cylindrical EMI suppression core. Employed High-Performance ferrites with superior frequency characteristic, RH-core is compact, high performance, also easy installation. There are various shapes according to wire material and characteristics. RH cores are as sensor core and instrumentation core to use for high frequency choking cancelling of parasitical oscillation and noise.
Countermeasures against radiated emissions; full compliance with FCC regulations and VCCI. Improving noise immunity of personal computers, microcomputers, peripheral and relative devices. The bigger RH cores are mainly produced for the cable assembly like power cable or signal cable, MATV and CATV. The smaller RH cores are the shaped ferrite core, sensor core, and instrumentation core to be passed through beads of other elements or use inductors by passing through wire.
NO. | TYPE | Dimensions(mm) | ||
---|---|---|---|---|
AΦ | CΦ | D | ||
1 | RH2.5×0.7×4 | 2.50 ±0.20 | 0.7 ±0.10 | 4.00 ±0.20 |
2 | RH2.5×0.8×5 | 2.50 ±0.20 | 0.80 ±0.10 | 5.00 ±0.20 |
3 | RH2.5×1.5×6 | 2.50 ±0.20 | 1.50 ±0.10 | 6.00 ±0.20 |
4 | RH3×1.3×3 | 3.00 ±0.20 | 1.30 ±0.10 | 3.00 ±0.20 |
5 | RH3×1×7 | 3.00 ±0.20 | 1.00 ±0.10 | 7.00 ±0.20 |
6 | RH3.5×0.8×4.7 | 3.50 ±0.20 | 0.80 ±0.10 | 4.70 ±0.20 |
7 | RH3.5×0.8×6 | 3.50 ±0.20 | 0.80 ±0.10 | 6.00 ±0.20 |
8 | RH3.5×0.8×9 | 3.50 ±0.20 | 0.80 ±0.10 | 9.00 ±0.20 |
9 | RH3.5×0.8×13.8 | 3.50 ±0.20 | 0.80 ±0.10 | 13.8 ±0.30 |
10 | RH3.5×1.0×3 | 3.50 ±0.20 | 1.00 ±0.10 | 3.00 ±0.20 |
11 | RH3.5×1.0×6 | 3.50 ±0.20 | 1.00 ±0.10 | 6.00 ±0.20 |
12 | RH3.5×1.15×10 | 3.50 ±0.20 | 1.15 ±0.10 | 10.0 ±0.30 |
13 | RH3.5×1.3×3 | 3.50 ±0.20 | 1.30 ±0.10 | 3.00 ±0.20 |
14 | RH3.5×1.3×6 | 3.50 ±0.20 | 1.30 ±0.10 | 6.00 ±0.20 |
15 | RH3.5×1.3×12 | 3.50 ±0.20 | 1.30 ±0.10 | 12.0 ±0.30 |