Bobbin >> EI
Introduce of magnet bobbins
The magnet bobbins material is usually (but not always) an insulating material, hence it can provide electrical isolation between the coil and the adjoining core material provided suitable creepage distance is used. Multi-section magnet bobbins are available to provide increased electrical isolation between coil windings. This transformers bobbin and shroud combination is just right for the demanding international markets.
Features of bobbin EI
This bobbin EI series belong to terminated Bobbins, which are offered an extensive line of pinned and lugged standard bobbins. Many EI cores can be pressed into different thicknesses, providing a selection of cross-sectional areas. Bobbin EI for these different cross-sectional areas are often available. We designed and built tooling capable of molding both the terminated and slotted versions of bobbin EI. We have many different sizes of these available and ready for immediate shipment.
Bobbin EI Material: Phenolic T375J
Pin of Bobbin EI Material:CP WIRE
Bobbin EI cost: relatively low.
Bobbin EI UL Class: UL 94V-0
Application of bobbin EI
Bobbin EI could be used for Ferrite Core used in Switching Power Transformers, Switch Transformer ,Inductor, Coil, Filter, PC board,etc.
 |
Name: |
YX-2201 |
series: |
EI |
Specification: |
|
Issue time: |
2005-3-9 |
|
 |
Name: |
YX-2202 |
series: |
EI |
Specification: |
|
Issue time: |
2005-3-9 |
|
 |
Name: |
YX-2203 |
series: |
EI |
Specification: |
YX-2203.pdf |
Issue time: | 2005-3-14 |
|
 |
Name: |
YX-2204 |
series: |
EI |
Specification: |
YX-2204.pdf |
Issue time: |
2005-3-9 |
|
 |
Name: |
YX-2205 |
series: |
EI |
Specification: |
YX-2205.pdf |
Issue time: |
2005-3-9 |
|
|
 |
Name: |
YX-3001-1 |
series: | EI |
Specification: |
YX-3001-1.pdf |
Issue time: |
2005-3-10 |
|
 |
Name: |
YX-3301 |
series: |
EI |
Specification: |
|
Issue time: |
2005-3-10 |
|